Permanent Engine Protection
for all heavy duty gas or diesel engines:
Since 1975, this unique proven formula has been providing full-time protection and improved performance. Lubrilon's proprietary formulation chemically bonds a micro-thin Permafused™ Lubricant film to all metal surfaces inside an engine. Lubrilon reacts only with PfL™ activated metal, leaving no build up that could change tolerances or alter oil flow. It is unequaled by modern day motor oils, synthetic lubricants, oil additives, moly or PTFE type engine treatments. The use of Lubrilon's Permanent Engine
Protection will not void manufacturer's engine warranty. This one-time use product protects and extends the life of your engine.
available in 32oz and 128oz bottles
Overall Performance Benefits:
Protects from Oil Shear, Oil Loss, Additive Breakdown, Acids, Dry Starts
Improves Compression, Horsepower, Fuel Mileage, Engine Life, Cold Weather Starts
Reduces Noise, Wear, Friction, Oil Consumption, Amp Draw, Idle Over heating, Corrosion
$199.80 128oz
BUY NOW for $139.86
we recommend following these directions exactly to ensure that you get the best performance improvement
A few things to know before you get started:
Lubrilon's permanent engine protection is compatible with all crude based and
synthetic based engine oils of all viscosities. .
For new and rebuilt engines: Do not use our Lubrilon's Permanent Engine
Protection until you have reached at least 5,000 miles and the rings have seated
(had a chance to form to the cylinder walls). This does not apply to diesel
engines up to 960 cu in or 14.6 liters
For optimum performance and protection we recommend that you retreat every 100,000
miles.
Do not mix our product with another. If your transmission has some other kind of treatment in it we recommend that you first change the fluids and then add our products.
We strongly recommend that you keep up your manufacturers' maintenance program.
Changing fluids regularly is the key to successful car maintenance.
Directions for Permanent Engine Protection:
Use at a 1% to 10% ratio. 1 part Lubrilon Heavy Duty Permanent Engine Protection to 10 parts of Manufacturers Recommended Motor Oil.
Drain oil and change filter.
Add Manufacturer Recommended Motor Oil.
Add Lubrilon Heavy Duty Permanent Engine Protection.
Start and run engine for 10 minutes to blend.
Drive normally and maintain proper oil level.
CAUTION: KEEP OUT OF REACH OF CHILDREN
Harmful if swallowed. Do not induce vomiting. Seek medical attention. Wash hands
thoroughly with soap and water after use.